Colemans Bridge

  • Trustfeed ratings Icon
  • Trustfeed ratings Icon
  • Trustfeed ratings Icon
  • Trustfeed ratings Icon
  • Trustfeed ratings Icon

North Lismore, Australia

roads-waterways.transport.nsw.gov.au
Bridge

Colemans Bridge Reviews | Rating 4.7 out of 5 stars (2 reviews)

Colemans Bridge is located in North Lismore, Australia on Union St. Colemans Bridge is rated 4.7 out of 5 in the category bridge in Australia.

Address

Union St

Open hours

...
Write review Claim Profile

C

Callem Daly

This bridge changed my life. Spanning across the Leycester creek. This marvel of structural engineering needs to become one of the many wonders of the world. 11/10 Would bridge again.

L

Lachie Harry

Coleman's Bridge is a Dare type timber truss road bridge. It has 2 timber truss spans, each of 32.0m (105ft). There are 2 timber approach spans at one end and 1 at the other giving the bridge an overall length of 90.7m (297ft). The bridge has a twin cylindrical cast iron central pier. Timber trestles provide the remaining sub structure. The bridge deck provides a dual lane carriage way and a footpath both sides of the roadway. The minimum width of the carriage way is 6.1m. An Armco traffic guard rail provides protection to vehicular traffic and a timber post and rail barrier forms the pedestrian walkway handrail. Curved steel braces fixed to the top chord of the timber truss help strengthen the outer timber pedestrian barriers. Timber truss road bridges have played a significant role in the expansion and improvement of the NSW road network. Prior to the bridges being built, river crossings were often dangerous in times of rain, which caused bulk freight movement to be prohibitively expensive for most agricultural and mining produce. Only the high priced wool clip of the time was able to carry the costs and inconvenience imposed by the generally inadequate river crossings that often existed prior to the trusses construction. Timber truss bridges were preferred by the Public Works Department from the mid 19th to the early 20th century because they were relatively cheap to construct, and used mostly local materials. The financially troubled governments of the day applied pressure to the Public Works Department to produce as much road and bridge work for as little cost as possible, using local materials. This condition effectively prohibited the use of iron and steel, as these, prior to the construction of the steel works at Newcastle in the early 20th century, had to be imported from England. Harvey Dare, the designer of Dare truss and other bridges, was a leading engineer in the Public Works Department, and a prominent figure in early 20th century NSW.